https://myfirststartrek.com Thu, 30 Apr 2026 02:23:19 +0000 en-US hourly 1 https://wordpress.org/?v=4.1.1 https://myfirststartrek.com/2026/04/star-trek-tos-dr-mccoy-costume-card-science-original-fabric-prop-relic-archives/ https://myfirststartrek.com/2026/04/star-trek-tos-dr-mccoy-costume-card-science-original-fabric-prop-relic-archives/#comments Sun, 05 Apr 2026 11:21:21 +0000 https://myfirststartrek.com/2026/04/star-trek-tos-dr-mccoy-costume-card-science-original-fabric-prop-relic-archives/ Read more »

]]>









I regretted that this card was never produced, essential in a fabric card collection. So i made it, using the last 2×2 inches piece of original blue fabric i had! Dr Leonard McCOY Blue Science TOS Fabric Card as could be from the Archives. Essential in a serious TOS Costume Card Collection! With the very little blue fabric left I have. Only 4 were made! Please note that this card is not production made, but both sides of the card are professionally laser printed on matte paper. Card is 9 x 6.3 cm, with nice recreated background. About the fabric : Not repro! Original fabric used for TOS command uniforms tunics. Know history since the 1987 sale, that use this Fabric. TOS Crew Relic Costume cards, From the Archives (only made some Spock Cards with the Blue). Photo of the card you will receive. No print of the advertisement will be included. You can easily sceen-capt all listing info and/or print to save in your datas. Please not that the bottom cut is not perfectly straight, due to the manual production (photo #8). Use of the Polyester Fabric began in the Third Season. The velour that had been used up to that time, was shrinking every time it was cleaned. So, a more durable Fabric that matched the established colors was found. These pieces were part of that what was left over when the show ceased production in 1969, after a part was utilized for the Phase 2 pre-production uniforms. Star Trek Collector since 1995 (at The Royal Albert Hall for the London Convention). You can have more details about this fabric and my serious on my website. The last photo is from my collection (not for sale, not included). And show the McCoy card with the other TOS productions.

]]> https://myfirststartrek.com/2026/04/star-trek-tos-dr-mccoy-costume-card-science-original-fabric-prop-relic-archives/feed/ 0 https://myfirststartrek.com/2026/04/star-trek-the-original-series-tricorder-prop-3d-printed-cosplay-display/ https://myfirststartrek.com/2026/04/star-trek-the-original-series-tricorder-prop-3d-printed-cosplay-display/#comments Thu, 02 Apr 2026 23:14:20 +0000 https://myfirststartrek.com/2026/04/star-trek-the-original-series-tricorder-prop-3d-printed-cosplay-display/ Read more »

]]>











Star Trek: The Original Series Tricorder – 3D Printed Prop for Cosplay & Display?? This product is a custom-made replica designed for cosplay and fan use. It is not an original production, officially licensed merchandise, or affiliated with any trademarked brands or intellectual property. ? Greetings, Fellow Nerds and Sci-Fi Lovers! Welcome to my 3D printing world! My passion is creating beautiful, high-quality props at affordable prices. I love 3D printing, and I hope you’ll enjoy the craft as much as I do! ? What You’ll Receive. Fully Assembled Tricorder No painting or extra work needed! Includes Strap & Stand for display. Hood Swivel & Latching Door with added magnets for secure closure. Steel Hinge Pins for durability. Authentic Design: Perfect for cosplay or display. Magnets for Functional Hood & Door. Solid Construction for long-lasting use. Star Trek Fans & Collectors. Cosplay Events & Conventions. Display in Home or Office. This is a 3D-printed prop/model and, as with all handcrafted items, there may be minor imperfections. Here’s what you should know. 3D Printing Flaws: While I take pride in delivering well-made items, some minor roughness may occur due to the use of support structures in the printing process. Honest Pricing: I keep my prices just above break-even because I’m passionate about making affordable props for fans like you. Every sale helps me continue this craft and bring joy to fellow Star Trek enthusiasts!

]]> https://myfirststartrek.com/2026/04/star-trek-the-original-series-tricorder-prop-3d-printed-cosplay-display/feed/ 0 https://myfirststartrek.com/2026/03/star-trek-iii-search-for-spock-starfleet-tricorder-fan-made-3d-printed-prop/ https://myfirststartrek.com/2026/03/star-trek-iii-search-for-spock-starfleet-tricorder-fan-made-3d-printed-prop/#comments Sat, 21 Mar 2026 19:52:48 +0000 https://myfirststartrek.com/2026/03/star-trek-iii-search-for-spock-starfleet-tricorder-fan-made-3d-printed-prop/ Read more »

]]>


















Discover the authenticity of the Star Trek III – Search for Spock – Starfleet Tricorder with Spring Loaded top. This product is a custom-made replica designed for cosplay and fan use. It is not an original production, officially licensed merchandise, or affiliated with any trademarked brands or intellectual property. Comes fully assembled and you will receive it AS SEEN! This will look awesome in your home, office or anywhere! I promise you will love this, and your friends will be super jealous! Live long and prosper… And keep those phasers set to stun! The item you are looking at is a picture of the exact item you will receive, but a model for pretty much the exact same thing. You are looking at a 3D printed prop/model. There will always be flaws in 3D printed and hand assembled items. Most 3D models will use supports to keep the item upright or give something with an overhang a place to rest when that layer begins to print. These supports can cause a rough area. This is expected and I do what I can to reduce this and adjust my prints to limit the amount of supports needed. Please do not try to take advantage of me. I keep my prices at just above a break even cost because I love how happy my props make people and I know before I did 3D printing, every prop I would find would look terrible or cost a fortune. I will never get better at this if I do the wrong thing all the time!

]]> https://myfirststartrek.com/2026/03/star-trek-iii-search-for-spock-starfleet-tricorder-fan-made-3d-printed-prop/feed/ 0 https://myfirststartrek.com/2026/03/star-trek-the-original-series-inspired-signature-data-padd-prop/ https://myfirststartrek.com/2026/03/star-trek-the-original-series-inspired-signature-data-padd-prop/#comments Tue, 17 Mar 2026 07:39:43 +0000 https://myfirststartrek.com/2026/03/star-trek-the-original-series-inspired-signature-data-padd-prop/ Read more »

]]>




This is a 3D printed replica prop of the PADD from Star Trek The Original Series. Now with a 1-piece body and vinyl sticker screen. The screen graphic is changeable. Kits requiring assembly are available on special request. This is a static model and does not have any functioning parts. Measures 11-5/8″ x 8-1/2″ x 2-1/8. Note that this is fully 3D printed and not painted, so it will not have paint getting scratched or flaking off. We always strive for the highest quality possible. Thanks to the designer UnimatrixRed (commercial license). This is not an officially licensed product and is only considered FAN ART. The item is 3D printed and assembled by us. Fan Art is protected under Fair Use Law. This product is NOT considered official merchandise in any way. We do not claim any ownership of this design, and this model is a hand-made replica made specifically for cosplay and entertainment purposes. 3D printed with PLA for the highest quality possible. PLA is a type of polyester made from fermented plant starch from corn, cassava, sugarcane, and sugar beet pulp. The sugar in these renewable materials is fermented and then converted into lactic acid, which is then made into polylactic acid, or PLA.

]]> https://myfirststartrek.com/2026/03/star-trek-the-original-series-inspired-signature-data-padd-prop/feed/ 0 https://myfirststartrek.com/2026/03/rare-star-trek-original-series-enginnering-prop-relica/ https://myfirststartrek.com/2026/03/rare-star-trek-original-series-enginnering-prop-relica/#comments Thu, 12 Mar 2026 07:24:46 +0000 https://myfirststartrek.com/2026/03/rare-star-trek-original-series-enginnering-prop-relica/ Read more »

]]>








THIS IS AN AWESOME 1 TO 1 PROP REPLICA OF THE BEACON LASER/ SOLDERING TOO/ DEFENSIVE RAY GUN FROM THE ORIGINAL SERIES. IT RUNS ON A 9V BATTERY LOCATED IN THE INSIDE. THIS HAS NO SOUND FX BUT THE PULSATING ARRAY OF LIGHTS EMITTING FROM THE TO. THIS PROP REPLICA WAS USED TWICE I9N THE DOOMSDAY MACHINE AND THE SQUIRE OF GOTHOS AS WELL. COMES AS SEEN WITH BATTERY INSTALLED. GREAT COLLECTABLE FOR TH AVID STAR TREK PROP COLLECTOR.

]]> https://myfirststartrek.com/2026/03/rare-star-trek-original-series-enginnering-prop-relica/feed/ 0 https://myfirststartrek.com/2026/03/star-trek-the-original-series-tricorder-prop-replica-preorder-3626/ https://myfirststartrek.com/2026/03/star-trek-the-original-series-tricorder-prop-replica-preorder-3626/#comments Wed, 04 Mar 2026 08:03:42 +0000 https://myfirststartrek.com/2026/03/star-trek-the-original-series-tricorder-prop-replica-preorder-3626/ Read more »

]]>



Star Trek: The Original Series Tricorder Prop Replica: Get ready to join an Enterprise landing party with this detailed toy tricorder from the original Star Trek series with authentic lights and sound! Open the top flap to reveal the recording discs and the moire pattern, which moves when you press the center button. The lower compartment contains more molded recording discs and a separate handheld scanner, which pulses with different colored lights when it is activated. The tricorder is based on careful study of the original prop. It is full size and measures 7 1/4-inches tall x 4 3/4-inches wide. The tricorder takes 3x “AAA” batteries, which are not included. 7.25 inches (18.42 cm). 4.75 inches (12.06 cm).

]]> https://myfirststartrek.com/2026/03/star-trek-the-original-series-tricorder-prop-replica-preorder-3626/feed/ 0 https://myfirststartrek.com/2026/02/star-trek-strange-new-worlds-phaser-anson-mount-signature-ed-prop-41100/ https://myfirststartrek.com/2026/02/star-trek-strange-new-worlds-phaser-anson-mount-signature-ed-prop-41100/#comments Fri, 20 Feb 2026 07:37:46 +0000 https://myfirststartrek.com/2026/02/star-trek-strange-new-worlds-phaser-anson-mount-signature-ed-prop-41100/











Star Trek Strange New Worlds Phaser ANSON MOUNT Signature Ed Prop 41/100. Opened for photos only, handled with gloves.

]]> https://myfirststartrek.com/2026/02/star-trek-strange-new-worlds-phaser-anson-mount-signature-ed-prop-41100/feed/ 0 https://myfirststartrek.com/2026/01/star-trek-tng-tr-580-tricorder-vii-display-replica-hand-finished-collector-prop/ https://myfirststartrek.com/2026/01/star-trek-tng-tr-580-tricorder-vii-display-replica-hand-finished-collector-prop/#comments Sat, 31 Jan 2026 06:52:47 +0000 https://myfirststartrek.com/2026/01/star-trek-tng-tr-580-tricorder-vii-display-replica-hand-finished-collector-prop/ Read more »

]]>














Hand finished, assembled, and upgraded for weight, durability, and display quality. This is not a raw 3D print. This is a hand-finished display replica of the TR-580 Tricorder VII from Star Trek: The Next Generation, built for collectors who want something more substantial than a basic 3D print. Although many replicas share a similar outward appearance, this tricorder has been redesigned, reinforced, and finished by hand to improve durability, weight, and overall presentation. The result is a tricorder that feels like a real prop when handled and looks at home on display. Hand Finishing and Construction. Each tricorder is printed at a high infill density to give it realistic weight and rigidity. After printing, the surfaces are wet sanded by hand to remove layer lines and produce a smooth, finished appearance before final assembly. The body has been redesigned to accept stainless steel hinges rather than the plastic hinges commonly used on other replicas. This provides smoother action, a more authentic feel, and long-term durability. All decals have been redesigned for enhanced appearance. Upgraded Holster and Display. The included holster has been redesigned with a hidden internal compartment and is lined with felt to protect the tricorder’s finish. This upgrade improves both function and presentation and is not found on standard builds. A matching display stand is included, allowing the tricorder to be displayed open or closed. Fully assembled TR-580 Tricorder VII with hand scanner. Detailed sensor module and felt-lined medical module. Felt-lined holster with hidden compartment. This tricorder is intended as a display piece and collectible. It’s ideal for shelves, offices, studios, or Star Trek collections where detail and finish matter. Of course, you can use it for cosplay as well if you want the highest quality prop. This is a fan-made replica and is not a licensed product. Each piece is made to order and finished by hand, so small variations are normal and part of the process.

]]> https://myfirststartrek.com/2026/01/star-trek-tng-tr-580-tricorder-vii-display-replica-hand-finished-collector-prop/feed/ 0 https://myfirststartrek.com/2026/01/star-trek-classic-communicator-prop-replica-lights-sound-2020-diamond-tos-rare/ https://myfirststartrek.com/2026/01/star-trek-classic-communicator-prop-replica-lights-sound-2020-diamond-tos-rare/#comments Thu, 15 Jan 2026 06:08:57 +0000 https://myfirststartrek.com/2026/01/star-trek-classic-communicator-prop-replica-lights-sound-2020-diamond-tos-rare/ Read more »

]]>









The Star Trek Classic Communicator Prop Replica by Diamond Select is a rare and highly sought-after collectible item perfect for any Star Trek fan. This exclusive piece features authentic lights and sound, immersing users in the iconic world of Star Trek: The Original Series. With its detailed design and association with Captain Kirk, this communicator replica is a must-have for collectors of science fiction memorabilia. Perfect for display or cosplay, this communicator replica is a unique and special addition to any Star Trek collection. Communicator is factory, sealed buttons still work when pushed through the hole that says try me.

]]> https://myfirststartrek.com/2026/01/star-trek-classic-communicator-prop-replica-lights-sound-2020-diamond-tos-rare/feed/ 0 https://myfirststartrek.com/2025/12/star-trek-into-darkness-starfleet-phaser-with-stand-plj-0924-110966-prop-replica/ https://myfirststartrek.com/2025/12/star-trek-into-darkness-starfleet-phaser-with-stand-plj-0924-110966-prop-replica/#comments Fri, 19 Dec 2025 05:06:45 +0000 https://myfirststartrek.com/2025/12/star-trek-into-darkness-starfleet-phaser-with-stand-plj-0924-110966-prop-replica/

















This phaser handgun is inspired by the Science Fiction & Horror genre and is a must-have for fans of the series. Although not signed or vintage, this officially licensed collectible is sure to be a valuable addition to any Star Trek memorabilia collection.

]]> https://myfirststartrek.com/2025/12/star-trek-into-darkness-starfleet-phaser-with-stand-plj-0924-110966-prop-replica/feed/ 0