Original Star Trek » scannerOriginal Star Trek

Original Star Trek » scannerOriginal Star Trek https://myfirststartrek.com Mon, 20 Apr 2026 23:56:50 +0000 en-US hourly 1 https://wordpress.org/?v=4.1.1 ST TOS Tricorder with Hand Scanner Hand Finished Display Replica https://myfirststartrek.com/2026/03/st-tos-tricorder-with-hand-scanner-hand-finished-display-replica/ https://myfirststartrek.com/2026/03/st-tos-tricorder-with-hand-scanner-hand-finished-display-replica/#comments Fri, 13 Mar 2026 19:27:59 +0000 https://myfirststartrek.com/2026/03/st-tos-tricorder-with-hand-scanner-hand-finished-display-replica/ Read more »

]]>

ST TOS Tricorder with Hand Scanner Hand Finished Display Replica

Add this wonderful display piece to your collection today! Included is a high-quality stand and a screen accurate hand scanner. This is the same hand scanner that I sell separately, and it features a rubberized base and holographic decals just like the screen-used prop. It also features a medical display on the bottom to match the medical display of the tricorder. This tricorder is based on a common reference model, but the design has been extensively rebuilt for screen accuracy, function, and finish. The faceplate and light bezels have been redesigned to match the dimensions and proportions of the original series prop. The lights are shaped and positioned to match the on-screen appearance. The tricorder includes three magnetically attached interchangeable screens. These screens are printed in high resolution on vinyl labels of the highest quality. They are then covered in a waterproof vinyl laminate. Finally, they are assembled in my screen assembly and covered with a clear “lens” to replicate the look of glass. The following screens are included. A landing party science display. A medical display created specifically for this build. A “powered off” display for static display. The moiré label is my own design and uses the same optical method used on the show. It is also covered in a clear plastic “lens” to add reflectivity. Hidden magnets have been designed into the lower door so it stays open naturally without flopping shut, and the body is printed with a textured finish to replicate the surface of the original prop while eliminating visible layer lines.
ST TOS Tricorder with Hand Scanner Hand Finished Display Replica

]]> https://myfirststartrek.com/2026/03/st-tos-tricorder-with-hand-scanner-hand-finished-display-replica/feed/ 0 Star Trek Tricorder with Three Changeable Screens and Medical Hand Scanner https://myfirststartrek.com/2025/12/star-trek-tricorder-with-three-changeable-screens-and-medical-hand-scanner/ https://myfirststartrek.com/2025/12/star-trek-tricorder-with-three-changeable-screens-and-medical-hand-scanner/#comments Sun, 21 Dec 2025 05:10:44 +0000 https://myfirststartrek.com/2025/12/star-trek-tricorder-with-three-changeable-screens-and-medical-hand-scanner/ Read more »

]]>

Star Trek Tricorder with Three Changeable Screens and Medical Hand Scanner

Own a piece of Star Trek history with this tricorder prop. I have spent almost a year perfecting every part of this tricorder. My focus has been on replicating the original prop and then developing a process for 3D printing each part that results in the highest quality possible. No one will believe this tricorder was 3D printed, but don’t believe me! Just read the reviews on this item. It is sure to please you or the Star Trek fan in your life. If you are ordering this as a gift, message me with the full name of the recipient and I will use that name for the personalized items. Your tricorder comes with a display stand for the tricorder and the hand scanner, along with a tag identifying it as a medical tricorder in true Star Trek style. This tricorder features three interchangeable screens that are easily swapped out using high-quality magnets that are incorporated into our model. When you want the tricorder to show a medical display, snap in the screen with the display. If you want a landing party screen with radar sensor, simply snap in the radar screen. When you want the tricorder to appear with a “turned off” screen, swap in the screen without the display. The choice is yours! Your spare screens store in the bottom compartment, and embedded magnets keep them secure while being stored. Faithfully replicated to match the tricorder from Star Trek: The Original Series, capturing every detail with precision, including the high-quality texture. Each tricorder is carefully printed with an emphasis on appearance and hand assembled to give a look and feel true to the original prop. High-quality and sturdy prop, a long-lasting piece for your collection. Includes an adjustable strap made of nylon webbing for durability. This tricorder is a “must have” for any Trekker looking to complete their Starfleet uniform or collection. Cosplayers: Ideal for conventions, cosplay events, and Star Trek-themed gatherings. Collectors: A standout addition to any Star Trek memorabilia collection, showcasing the iconic technology of the series. Dimensions: 5.25″ wide x 7″ high x 2.25 deep (without stand). 7.25″ wide x 8″ high x 3.25 deep (with stand). Weight: 2.25 lbs. Material: 3D-printed PLA – Nylon webbing used for the strap. Rubberized base for hand scanner and clear PETG top. Don’t miss out on owning a piece of Star Trek history. Add our tricorder to your collection or gift it to the Star Trek fan in your life! This tricorder is a fan-made replica and not an officially licensed Star Trek product.
Star Trek Tricorder with Three Changeable Screens and Medical Hand Scanner

]]> https://myfirststartrek.com/2025/12/star-trek-tricorder-with-three-changeable-screens-and-medical-hand-scanner/feed/ 0 Star Trek TOS Original Series Tricorder Science Scanner W Sound Prop Replica https://myfirststartrek.com/2025/04/star-trek-tos-original-series-tricorder-science-scanner-w-sound-prop-replica/ https://myfirststartrek.com/2025/04/star-trek-tos-original-series-tricorder-science-scanner-w-sound-prop-replica/#comments Tue, 08 Apr 2025 09:00:42 +0000 https://myfirststartrek.com/2025/04/star-trek-tos-original-series-tricorder-science-scanner-w-sound-prop-replica/ Read more »

]]>

Star Trek TOS Original Series Tricorder Science Scanner W Sound Prop Replica

Up for sale is a “Science” or “Vulcan Medical Scanner” as seen in the TV Series, Star Trek. It was originally used by Dr. M’Benga to treat Spock who had been wounded while visiting a planet in the episode, A Private Little War. It was also used by Dr. Daystrom to scan computer equipment in the episode, The Ultimate Computer and is my favorite scene. The scanner is machined from aluminum based on rare, archival photos along with the same model and type of switches used on the original, which are now hard to find. The scanner runs on a RGB LED which pulsates and twinkles randomly (see video). The LED uses new technology randomly displaying up to 7 different color combinations including purple. These new scanners are now less than 3 ounces in weight! This version of the scanner includes a sound card. The sound is controlled by one switch, while the other switch controls the lights. A single cell 3v battery comes pre-installed so it’s ready for use. Also included is a set of instructions on how to replace the battery along with battery specifications. This prop is from a short run and I don’t expect to have these available for long, so get yours while I still have them! Please be aware that you will only be getting the scanner prop seen in the photos and NOT any of the other items seen in the video, which includes my hand! Please to check out my. Store for more prop replicas! Feel free to send me a message if you have any questions. Previous customers include: Disney Studios, Elstree Studios, IIS Props, Disney World and Legoland Europe.
Star Trek TOS Original Series Tricorder Science Scanner W Sound Prop Replica

]]> https://myfirststartrek.com/2025/04/star-trek-tos-original-series-tricorder-science-scanner-w-sound-prop-replica/feed/ 0 Star Trek, BUILT McCoy Medical Scanner, Sounds, Spins, MoPop Copy https://myfirststartrek.com/2024/03/star-trek-built-mccoy-medical-scanner-sounds-spins-mopop-copy/ https://myfirststartrek.com/2024/03/star-trek-built-mccoy-medical-scanner-sounds-spins-mopop-copy/#comments Sun, 24 Mar 2024 21:30:22 +0000 https://myfirststartrek.com/2024/03/star-trek-built-mccoy-medical-scanner-sounds-spins-mopop-copy/ Read more »

]]>

Star Trek, BUILT McCoy Medical Scanner, Sounds, Spins, MoPop Copy

Star Trek TOS, Dr. McCoys MoPop-Museum-Copy, Medical Scanner BUILT. This reproduction is expertly machined out of aluminum. The body is hard anodized black aluminum and in exactly the size and details of the MoPop Museum Displayed Prop. Scanner with sounds and spin (view video clip). Battery Cap Removal Tool in Acrylic Rod. Two spare batteries (one set). THIS IS A COMPLETE BUILT ITEM : The prop is hand Crafted of; black anodized machined aluminum, acrylic tube and cap, 1 hologram stickers, pin-stripes, the spinner motor, with LR44 battery holder, the worble-worble soundboard and the batteries are installed too! INCLUDED IN THIS SALE. Built Scanner with worble-worble sounds and spinning doodad. This is built on the R2 engineered version and features; louder sound and much easier battery changes as a result of a best-cap-fit that is much more easily removed. See sale photos to see how this was constructed. Included is an Acrylic Rod Top-Cap removal tool for battery changes. Two spare battery cells are provided. Two more are installed in the Scanner. In the battery holder to get a little more sound volume and slightly faster spin, however, using three batteries may cause the speaker to “skip” once in a while. If a skip occurs, release the button and resume use. Once the batteries run-down a bit the skip stops. The worble-worble sound on the TV show was dubbed-in. The prop makes that sound, however, adjust your expectations and realize the prop won’t fill the room with sound like the TV show did. The Body Cap; machined aluminum with 3/8 motor hole and O-Ring and O-ring groove for securing and removing the top to change batteries. Bottom Plate; CNC machine engraved, red & green dots, white-triangle indicators, white bars scales. Custom Machined aluminum 3/4 inch inner-spinner-top-cap with motor boss and set screw. The Round 1 hologram stickers. Custom Gold top push button momentary switch. Includes the 2-batteries in the LR44 Battery Holder and spare set. Some Star Trek Prop History For Inquiring Minds. Most of these Prop Makers and Technicians have passed-on. Below are old-timer accounts of convention conversations before conventions were really a fad. (all 2nd hand stories). The persons quoted worked for; Desilu, NBC, Paramount & Gene. Bob Stone was Star Trek’s machinist and made all the metal prop parts for all three seasons of the show. Parts were made to order for each episode as in those times (the 1960’s) as machining was done by hand and there was no advantage to making short runs (and no studio funding either). Each episode had a specific budget. According to Bob there was no magic drum of Phaser Nozzles and every job was a mad-dash to meet the filming deadlines. Because parts were made only to order, parts varied quite a bit. These variations can be seen in all the surviving examples of TOS hand props from Phaser to Communicators and Tricorders. Sometimes it was not that a new design was needed but rather that when one Wings it from a sketch, in a hurry using what is on-hand, you get an unintended-new-version of something (in the 1960’s the TV audience never could see that). Robert Archer and Bob Stone worked closely together so when the show was cancelled suddenly in season three, Robert Archer ended up with a nice collection of hand props. Richard Heimer made the molds for hand props. He also did all the casting and forming. This included; Vacuum form bucks, Fiberglass molds and, urethane molds. Again, according to him most work is done in the normal Hollywood maddening rush. He shared with his convention friends that there were many molds made from molds when the production schedule demanded this. He also shared that when the show ended he rescued the molds from being discarded by putting them in his garage. 1919 was the director of special effects for the show. He handled and repaired many of the props on-set. When the show was cancelled in season three he rescued many hand props and even some models from the scrap heap. Dick Ruben, Prop & Art Assistant on the show, got his Set-Used Klingon disruptor from James. Ruggs held on to his rather large Star Trek collection for many years. It is widely known that Greg Jein got his Holy-Grail Hero Phaser from James. In closing a nod to Mr. Ruck, a prop technician, who reported that he repaired some hand props hundreds of times as they were often damaged during filming. He had also shared that the fiberglass Mid-Grade’s, and some other props often used basswood strips between the seams to establish uniform dimensions. Watch some YouTube Star Trek TOS bloopers to see what he was talking when it comes to repairs and hand props flying apart. Jonpaultrek2012 And related marks and logos are trademarks of Jonpaultrek2012 LLC. All Rights are hereby explicitly Reserved. All scanning, uploading, and distribution of the content of this web posting without permission is theft of the author’s Intellectual Property. If you would like permission to use the material from this website (Other than for the intended review purposes) Please contact me for permission.
Star Trek, BUILT McCoy Medical Scanner, Sounds, Spins, MoPop Copy

]]> https://myfirststartrek.com/2024/03/star-trek-built-mccoy-medical-scanner-sounds-spins-mopop-copy/feed/ 0 Star Trek TOS, Dr. McCoys MoPop-Museum-Copy, Medical Scanner Parts Kit ROUND 2 https://myfirststartrek.com/2023/08/star-trek-tos-dr-mccoys-mopop-museum-copy-medical-scanner-parts-kit-round-2/ https://myfirststartrek.com/2023/08/star-trek-tos-dr-mccoys-mopop-museum-copy-medical-scanner-parts-kit-round-2/#comments Sun, 06 Aug 2023 05:53:09 +0000 https://myfirststartrek.com/2023/08/star-trek-tos-dr-mccoys-mopop-museum-copy-medical-scanner-parts-kit-round-2/ Read more »

]]>

Star Trek TOS, Dr. McCoys MoPop-Museum-Copy, Medical Scanner Parts Kit ROUND 2

Star Trek TOS, Dr. McCoys MoPop-Museum-Copy, Medical Scanner Parts Kit. Round 2; Fits improved based on first issue feedback. McCoy How-To-Build Video 2023 r2. INCLUDES ALL THE PARTS SHOWN RED-BACKGROUND PHOTOS AND AS LISTED BELOW. Set Reference; Star Trek TOS “Who Mourns for Adonais” S2, E2; for red button med scanner, about 13 minutes into the episode. I HAVE PROVIDED SOME PHOTOS OF HOW-TO-MODIFY BUILDER-FURNISHED PLAYMATES-BRAND WORBLE SOUNDBOARD, YOU ARE THE PROP BUILDER! IMPROVED: The aluminum-spinner-cap motor-hole is over 9/32 deep (nominal) and will allow even more space for the Worble Soundboard, again you are the Prop Builder. This reproduction is expertly machined out of aluminum. The body is a hard anodized black aluminum and in exactly the nominal size and details of the MoPop Museum Displayed Prop. If you add sound do so (as a parallel circuit) keep all voltage at 4.5v. Google PARALLEL CIRCUIT if you need to. Also, some builders use 4-LR43 lithium (silver oxide) batteries for a 6v system. If you do this add a 20-Ohm resistor to one of the speaker wire legs to reduce crackling noises. THIS IS A COMPLETE PARTS KIT: Crafted of machined aluminum, acrylic tube and cap, one set of hologram stickers, pin-stripe red tape, the motor, three LR44 battery holder, and even the set-screw! INCLUDES THE MOTOR AND BRASS GEARBOX WITH MoPoP STYLE MACHINED INNER-ALUMINUM-TOPPER-CAP. Now has an exposed lathe-center hole just like the Set-Used prop and the motor-shaft to spinner-cap fit is a class 4, nice and snug to keep things concentric. INCLUDES ONE LR44 BATTERY HOLDER FOR: 3-LR44 LITHIUM CELLS OR, 4-LR43 LITHIUM CELLS (YOU PICK AND PROVIDE BATTERIES). INCLUDES INNER-SPINNER MACHINED-ALUMINUM 3/4 DIAMETER TOP-CAP WITH BOSS AND SET SCREW FOR MOTOR. MOTOR SHAFT TO CAP TOLERANCE IMPROVED. General Sizes (nominal) of the assembled kit are in the listing pictures of the MoPop Museum Prop. Sound board design is a suggestion and those items are not part of kit. INCLUDED IN THIS KIT. Black Body hard anodized. 259 inches (for 7mm push button), 6 holes. 070 inches diameter are opposite for air release (breaks the vacuum and allows the cap to seat and remove) and. 335 diameter bottom hole allow for sound to escape under engraved bottom plate. Clear interior body cavity is 1.193 inches diameter x 1.043 high with the cap installed. Spacious for a sound board that. Body Cap; machined aluminum with 3/8 motor hole and O-Ring and O-ring groove for securing and removing top FROM BLACK BODY and a Groove for 1 inch outer fixed acrylic tube to seat into. The body cap may be snug HOWEVER adding some Vaseline or a drop of oil to the O-Ring will make the parts more easily assemble and disassemble. Bottom Plate; laser and machine engraved, suggest red-dots enamel, red-triangle enamel, white bars enamel, OR flip over for orthodox TOS buffs who prefer a plain bottom. Outer Acrylic 1 diameter and machined to correct height. Acrylic cap for 1″ diameter tube has been changed to a thinner 1/16″ thickness to more closely resemble the Set-Used MoPop original Prop. Inner acrylic 3/4 inch diameter and machined to correct height. BUILDER TIP: Paint the outside (or inside if you prefer) of the 3/4 inch spinner tube Tamiya Silver Leaf Color before the assembly to the inner aluminum spinner cap and motor. Custom Machined aluminum 3/4 inch inner spinner cap with motor boss and set screw included! Two Red pinstripes for 3/4 acrylic. Three Round 1 silver stickers for 3/4 diameter inner-acrylic-spinner. NEW Red top push button momentary switch suggest nut & washer be painted black by the builder, (I discard the washer). The Red plastic button takes paint very well. Motor is a DC 3.5 to 4.5 volts at the correct 300 RPM for Star Trek with brass gearbox and a flat spot on the shaft and, the motor comes with pre-soldered leads. The motor does project down into the clear inner cavity of the Black Anodized Body by. Inches (max) at the motor base diameter of 15/32 inches. Lithium Battery Holder (silver oxide) accepts; LR44 x 3 cells for. 4.5V set up or, 4-LR43 cells for a 6v set up. You are the prop builder.
Star Trek TOS, Dr. McCoys MoPop-Museum-Copy, Medical Scanner Parts Kit ROUND 2

Incoming search terms:

dr mccoy’s scanner

]]> https://myfirststartrek.com/2023/08/star-trek-tos-dr-mccoys-mopop-museum-copy-medical-scanner-parts-kit-round-2/feed/ 0 Star Trek TNG Medical Set (Hypospray & Scanner) Limited Edition Prop Replica NIB https://myfirststartrek.com/2023/02/star-trek-tng-medical-set-hypospray-scanner-limited-edition-prop-replica-nib-2/ https://myfirststartrek.com/2023/02/star-trek-tng-medical-set-hypospray-scanner-limited-edition-prop-replica-nib-2/#comments Wed, 08 Feb 2023 02:05:28 +0000 https://myfirststartrek.com/2023/02/star-trek-tng-medical-set-hypospray-scanner-limited-edition-prop-replica-nib-2/ Read more »

]]>

Star Trek TNG Medical Set (Hypospray & Scanner) Limited Edition Prop Replica NIB

Pretend that you are a space doctor! Real-world look and feel — lights, sounds, and heavy diecast metal. No cheapo-3D prints here. Set of 3 (three) interchangeable vials, each with its own color. Presentation case for collectors who like classy presentation of their replicas from the final frontier. Medical Set Replica has been copied directly from surviving resources in the CBS archives to ensure accuracy. Its development team also spent many hours analyzing footage to fine-tune the details. This 1:1 scale set replicates two iconic props used by 24th century physicians in. Star Trek: The Next Generation. It consists of a Hypospray (with interchangeable vials) and a Hand Scanner. Both feature electronic light and/or sound effects and are crafted with heavy diecast metal bodies. Each numbered limited edition museum quality replica set comes with a wooden presentation case, cast metal plaque and a certificate of authenticity/prop story booklet and will make a fine addition to any. The Hypospray and the Hand Scanner each operate on three LR44 batteries (included). This item is in the category “Collectibles\Science Fiction & Horror\Star Trek Collectibles\Other Star Trek Collectibles”. The seller is “sellgeek” and is located in this country: US. This item can be shipped worldwide.

Convention/Event: Destination Star Trek
Character: Dr. Beverly Crusher
MPN: 408677
UPC Code: 5060224086773
Franchise: Star Trek
Modified Item: No
Vintage: No
Brand: Factory Entertainment
Type: Medical Set
Year: 2022
Packaging: Original (Unopened)
Series/Movie: The Next Generation
Genre: Science Fiction & Horror
Country/Region of Manufacture: China
Character Family: Star Trek

]]> https://myfirststartrek.com/2023/02/star-trek-tng-medical-set-hypospray-scanner-limited-edition-prop-replica-nib-2/feed/ 0 Star Trek TNG Medical Set (Hypospray & Scanner) Limited Edition Prop Replica NIB https://myfirststartrek.com/2022/11/star-trek-tng-medical-set-hypospray-scanner-limited-edition-prop-replica-nib/ https://myfirststartrek.com/2022/11/star-trek-tng-medical-set-hypospray-scanner-limited-edition-prop-replica-nib/#comments Fri, 11 Nov 2022 05:41:22 +0000 https://myfirststartrek.com/2022/11/star-trek-tng-medical-set-hypospray-scanner-limited-edition-prop-replica-nib/ Read more »

]]>

Convention/Event: Destination Star Trek
Character: Dr. Beverly Crusher
MPN: 408677
UPC Code: 5060224086773
Franchise: Star Trek
Modified Item: No
Vintage: No
Brand: Factory Entertainment
Type: Medical Set
Year: 2022
Packaging: Original (Unopened)
Series/Movie: The Next Generation
Genre: Science Fiction & Horror
Country/Region of Manufacture: China
Character Family: Star Trek

]]> https://myfirststartrek.com/2022/11/star-trek-tng-medical-set-hypospray-scanner-limited-edition-prop-replica-nib/feed/ 0 Star Trek The Original Series Classic Science Tricorder Removable Scanner Black https://myfirststartrek.com/2020/06/star-trek-the-original-series-classic-science-tricorder-removable-scanner-black/ https://myfirststartrek.com/2020/06/star-trek-the-original-series-classic-science-tricorder-removable-scanner-black/#comments Tue, 23 Jun 2020 01:53:45 +0000 http://myfirststartrek.com/2020/06/star-trek-the-original-series-classic-science-tricorder-removable-scanner-black/ Read more »

]]>

Star Trek The Original Series Classic Science Tricorder Removable Scanner Black

DIAMOND SELECT TOYS Star Trek: The Original Series Tricorder. A Diamond Select release. Features silver highlights over a black finish. Working lights and sound effects. Includes removable scanner accessory. Tricorder is the memorable portable computer / scanner carried by members of the Enterprise’s landing parties. Replica features authentic sounds from the original series. Flip-open front that reveals speakers and dials. Generic Specifications: -Decades after its 1966 TV debut, star trek remains one of the most widely recognized pop culture franchises. Generic Dimensions: -11.9″ H x 3.1″ W x 11.6 D, 1.55 lbs. Dimensions: Overall Height – Top to Bottom: -11.9 Inches. Overall Width – Side to Side: -3.1 Inches. Overall Depth – Front to Back: -11.6 Inches. Overall Product Weight: -1.55 Pounds. A Diamond Select Release. After the runaway success of Star Trek’s classic era Phaser and Communicator, boldly go where no man has gone before with this authentic Tricorder role play replica. Based on the classic 23rd century design, the electronic Tricorder features silver highlights over a black finish, as well as light and sound effects taken from the classic Star Trek series. Also included is the removable scanner accessory, perfect for your next away mission. Product Dimensions: 12 x 5 x 8 inches. Item Weight: 13.4 ounces. Item model number: MAY084717. Item must be sent back in the same NEW original condition as received with all original accessories. We usually respond within 24 hours on weekdays. The item “Star Trek The Original Series Classic Science Tricorder Removable Scanner Black” is in sale since Tuesday, October 1, 2019. This item is in the category “Collectibles\Science Fiction & Horror\Star Trek Collectibles\Other Star Trek Collectibles”. The seller is “premium.hvn” and is located in Hempstead, New York. This item can be shipped to United States, Canada, United Kingdom, Denmark, Romania, Slovakia, Bulgaria, Czech republic, Finland, Hungary, Latvia, Lithuania, Malta, Estonia, Australia, Greece, Portugal, Cyprus, Slovenia, Japan, China, Sweden, South Korea, Indonesia, Taiwan, South africa, Thailand, Belgium, France, Hong Kong, Ireland, Netherlands, Poland, Spain, Italy, Germany, Austria, Bahamas, Israel, Mexico, New Zealand, Philippines, Singapore, Switzerland, Norway, Saudi arabia, United arab emirates, Qatar, Kuwait, Bahrain, Croatia, Malaysia, Brazil, Chile, Colombia, Costa rica, Dominican republic, Panama, Trinidad and tobago, Guatemala, El salvador, Honduras, Jamaica, Antigua and barbuda, Aruba, Belize, Dominica, Grenada, Saint kitts and nevis, Saint lucia, Turks and caicos islands, Barbados, Bangladesh, Bermuda, Brunei darussalam, Bolivia, Ecuador, Egypt, French guiana, Guernsey, Gibraltar, Guadeloupe, Iceland, Jersey, Jordan, Cambodia, Cayman islands, Liechtenstein, Sri lanka, Luxembourg, Monaco, Macao, Martinique, Maldives, Nicaragua, Oman, Peru, Pakistan, Paraguay, Reunion, Viet nam, Uruguay, Russian federation.

Model: MAY084717
Recommended Age: 8+
Character: Star Trek
Convention/Event: Destination Star Trek
Brand: DIAMOND SELECT TOYS
Series/Movie: The Original Series
Type: Tricorder

]]> https://myfirststartrek.com/2020/06/star-trek-the-original-series-classic-science-tricorder-removable-scanner-black/feed/ 0