https://myfirststartrek.com Sun, 05 Apr 2026 23:22:59 +0000 en-US hourly 1 https://wordpress.org/?v=4.1.1 https://myfirststartrek.com/2026/01/vintage-star-trek-tos-replica-spocks-tricorder-diamond-select-working/ https://myfirststartrek.com/2026/01/vintage-star-trek-tos-replica-spocks-tricorder-diamond-select-working/#comments Wed, 21 Jan 2026 18:29:42 +0000 https://myfirststartrek.com/2026/01/vintage-star-trek-tos-replica-spocks-tricorder-diamond-select-working/ Read more »

]]>







Explore the final frontier with this officially licensed Star Trek: The Original Series replica tricorder by Diamond Select. Designed to replicate the iconic handheld device seen throughout the original series, this piece is a great addition to any Star Trek collection. The tricorder is used but in excellent condition and fully functional. It has been tested and works as intended. Please note that there is a small rattle from inside the tricorder when it is moved; this does not affect functionality. It requires AAA batteries, which are included, so it’s ready to use right out of the box. Official Star Trek: The Original Series replica tricorder. Used, excellent cosmetic condition. Requires AAA batteries (included). Ideal for display, cosplay, or collectors. Please review photos for exact condition. Feel free to message with any questions. Live long and prosper??

]]> https://myfirststartrek.com/2026/01/vintage-star-trek-tos-replica-spocks-tricorder-diamond-select-working/feed/ 0 https://myfirststartrek.com/2023/01/star-trek-spocks-brain-control-s3-e1-2/ https://myfirststartrek.com/2023/01/star-trek-spocks-brain-control-s3-e1-2/#comments Thu, 05 Jan 2023 10:51:50 +0000 https://myfirststartrek.com/2023/01/star-trek-spocks-brain-control-s3-e1-2/ Read more »

]]>












Star Trek, Spock’s Controller, Season 3, e1. That Which Survives Episode Reproduction.. Custom made Screen Accurate body, Custom Turned and knurled aluminum center knob. SPOCKS’ BRAIN CONTROL 2022. This Controller is Screen Accurate in every detail. ACCURATE PROFILE AND HEIGHT Lathe turned aluminum center knob. Photo of Greg Jein Collection Set Used. Spock’s Brain Controller and, accurate flanking plastic knobs as well. Body color and patterns are Painted to match the Screen Used Prop as Seen on the episode. The Enterprise is approached by an ion-propelled craft much to Eng. Scott’s liking; from it enters a female who renders everyone unconscious. When the crew wakes up, McCoy finds Spock alive in sick bay but with his brain surgically removed. A control system is made. This is the remote for Spock. The harlequin pattern on the prop is a nod to the historic context of mimes and clowns, is Spock now a mime? Oh crap & creepy huh.. The Control Prop before you is a very accurate copy of the Set Used Version and features. Controller Measures: (approximate in inches) 1 high x 5-1/2 long x 3-1/2 wide. Heavy feel as it is solid cast acrylic everywhere. Cast translucent and opaque acrylic buttons in colors as seen on the episode. Pearl lacquer paint and harlequin pattern to match the colors and design seen On Set. Lathe turned ACCURATE HEIGHT AND PROFILE center aluminum knob with screen accurate knurl detail. Compare the Greg Jein Collection photo of Set Used Spocks’ Brain Controller. Flanking black plastic knobs secured with epoxy & BRASS PINS to insure they can not come loose. A custom made 1″ thick acrylic display stand recalling Spock’s favorite game, 3D chess, Measures: (approximate in inches) 4 x 6 x 1 and has four small feet and acrylic rods (pinned to base with 1/8″ acrylic dowel) for durable display at the perfect viewing angle. Some Star Trek Prop History For Inquiring Minds. Most of these Prop Makers and Technicians have passed-on. Below are old-timer accounts of convention conversations before conventions were really a fad. (all these are therefore 2nd hand stories). The persons quoted worked for; Desilu ®, NBC ®, Paramount ® & Gene. Star Trek’s machinist. And made all the metal prop parts for all three seasons of the show. Parts were made to order for each episode as in those times (the 1960’s) as machining was done by hand and there was no advantage to making short runs (and no studio funding either). Each episode had a specific budget. Speaking of budgets, Bob relied on his Star Trek friend. According to Bob there was no magic drum of Phaser Nozzles and every job was a mad-dash to meet the filming deadlines. Because parts were made only to order, parts varied quite a bit. These variations can be seen in all the surviving examples of TOS hand props from Phaser to Communicators and Tricorders. Sometimes it was not that a new design was needed but rather that when one Wings it from a sketch, in a hurry using what is on-hand, you get an unintended-new-version of something (in the 1960’s the TV audience never could see that). Robert Archer and Bob Stone worked closely together so when the show was canceled suddenly in season three, Robert Archer ended up with a nice collection of hand props. Made the molds for hand props. He also did all the casting and forming. This included; Vacuum form bucks, Fiberglass molds and urethane molds. Again, according to him most work is done in the normal Hollywood maddening rush. He shared with his convention friends that there were many molds made from molds when the production schedule demanded this. He also shared that when the show ended he rescued the molds from being discarded by putting them in his garage. 1919 was the director of special effects for the show. He handled and repaired many of the props on-set. When the show was canceled in season three he rescued many hand props and even some models from the scrap heap. Dick Ruben, Prop & Art Assistant on the show, got his Set-Used Klingon disruptor from James. Ruggs held on to his rather large Star Trek collection for many years. It is widely known that Greg Jein got his Holy-Grail Hero Phaser from James. In closing a nod to. A prop technician, who reported that he repaired some hand props hundreds of times as they were often damaged during filming. He had also shared that the fiberglass Mid-Grade’s, and some other props often used basswood strips between the seams to establish uniform dimensions. Watch some YouTube Star Trek TOS bloopers to see what he was talking about when it comes to repairs and hand props flying apart. This item is in the category “Collectibles\Science Fiction & Horror\Star Trek Collectibles\Other Star Trek Collectibles”. The seller is “susannetrek” and is located in this country: US. This item can be shipped worldwide.

• Convention/Event: New York Comic Con
• Brand: jonpaultrek2012
• Type: Star Trek Prop
• Character: Captain Kirk
• Signed: No
• Series/Movie: Original Series
• Genre: Science Fiction & Horror
• Country/Region of Manufacture: United States
• Robert Lansing: Teri Garr
• Franchise: Star Trek
• Modified Item: No
• Vintage: No

]]> https://myfirststartrek.com/2023/01/star-trek-spocks-brain-control-s3-e1-2/feed/ 0 https://myfirststartrek.com/2022/12/star-trek-spocks-calculator-season-3-e17/ https://myfirststartrek.com/2022/12/star-trek-spocks-calculator-season-3-e17/#comments Sun, 25 Dec 2022 03:24:47 +0000 https://myfirststartrek.com/2022/12/star-trek-spocks-calculator-season-3-e17/ Read more »

]]>










Star Trek, Spock’s Calculator, Season 3, E17. That Which Survives Episode Reproduction.. Custom made Screen Accurate body, Custom Turned and knurled aluminum center knob. This Calculator is Screen Accurate in every detail. ACCURATE PROFILE AND HEIGHT Lathe turned aluminum center knob (compare with photo of Greg Jein Collection Set Used Spock’s Brain Controller) and, accurate flanking plastic knobs as well. Body is Painted to match the Screen Colors as Seen on the episode. She touches an ensign and kills him. Already dematerializing in the transporter beam, Kirk and the rest of his party are helpless to stop her. The surge of power that Losira’s appearance had caused hurdles the U. Enterprise 990.7 light-years away from where they were. Spock calculates that it will take 11.33 hours at warp 8.4 to return to the planet.. Oh crap huh.. The Calculator Prop before you is an exact copy of the Screen Version and features. Real Photo is not inkjet printed. Calculator Measures: (approximate in inches) 1 high x 5-1/2 long x 3-1/2 wide. Heavy feel as it is solid black tinted fiberglass epoxy everywhere. Much stronger than resin. Cast opaque and translucent acrylic buttons in colors as seen on the episode. Pearl lacquer finish to match the color and finish seen On Screen. Lathe turned ACCURATE HEIGHT AND PROFILE center aluminum knob with screen accurate knurl detail. Compare to Greg Jein Collection photo of Set Used Spocks’ Brain Controller. Flanking black plastic knobs secured with epoxy & BRASS PINS to insure they can not come loose. A custom made 1″ thick acrylic display stand recalling Spock’s favorite game, 3D chess, Measures: (approximate in inches) 4 x 6 x 1 and has four small feet and acrylic rods (pinned to base with 1/8″ acrylic dowel) for durable display at the perfect viewing angle. Some Star Trek Prop History For Inquiring Minds. Most of these Prop Makers and Technicians have passed-on. Below are old-timer accounts of convention conversations before conventions were really a fad. (all these are therefore 2nd hand stories). The persons quoted worked for; Desilu ®, NBC ®, Paramount ® & Gene. Star Trek’s machinist. And made all the metal prop parts for all three seasons of the show. Parts were made to order for each episode as in those times (the 1960’s) as machining was done by hand and there was no advantage to making short runs (and no studio funding either). Each episode had a specific budget. Speaking of budgets, Bob relied on his Star Trek friend. According to Bob there was no magic drum of Phaser Nozzles and every job was a mad-dash to meet the filming deadlines. Because parts were made only to order, parts varied quite a bit. These variations can be seen in all the surviving examples of TOS hand props from Phaser to Communicators and Tricorders. Sometimes it was not that a new design was needed but rather that when one Wings it from a sketch, in a hurry using what is on-hand, you get an unintended-new-version of something (in the 1960’s the TV audience never could see that). Robert Archer and Bob Stone worked closely together so when the show was canceled suddenly in season three, Robert Archer ended up with a nice collection of hand props. Made the molds for hand props. He also did all the casting and forming. This included; Vacuum form bucks, Fiberglass molds and urethane molds. Again, according to him most work is done in the normal Hollywood maddening rush. He shared with his convention friends that there were many molds made from molds when the production schedule demanded this. He also shared that when the show ended he rescued the molds from being discarded by putting them in his garage. 1919 was the director of special effects for the show. He handled and repaired many of the props on-set. When the show was canceled in season three he rescued many hand props and even some models from the scrap heap. Dick Ruben, Prop & Art Assistant on the show, got his Set-Used Klingon disruptor from James. Ruggs held on to his rather large Star Trek collection for many years. It is widely known that Greg Jein got his Holy-Grail Hero Phaser from James. In closing a nod to. A prop technician, who reported that he repaired some hand props hundreds of times as they were often damaged during filming. He had also shared that the fiberglass Mid-Grade’s, and some other props often used basswood strips between the seams to establish uniform dimensions. Watch some YouTube Star Trek TOS bloopers to see what he was talking about when it comes to repairs and hand props flying apart. This item is in the category “Collectibles\Science Fiction & Horror\Star Trek Collectibles\Other Star Trek Collectibles”. The seller is “susannetrek” and is located in this country: US. This item can be shipped worldwide.

• Convention/Event: New York Comic Con
• Brand: jonpaultrek2012
• Type: Star Trek Prop
• Character: Captain Kirk
• Signed: No
• Series/Movie: Original Series
• Genre: Science Fiction & Horror
• Country/Region of Manufacture: United States
• Robert Lansing: Teri Garr
• Franchise: Star Trek
• Modified Item: No
• Vintage: No

]]> https://myfirststartrek.com/2022/12/star-trek-spocks-calculator-season-3-e17/feed/ 0 https://myfirststartrek.com/2022/11/star-trek-spocks-brain-control-s3-e1/ https://myfirststartrek.com/2022/11/star-trek-spocks-brain-control-s3-e1/#comments Tue, 22 Nov 2022 09:26:13 +0000 https://myfirststartrek.com/2022/11/star-trek-spocks-brain-control-s3-e1/ Read more »

]]>












Star Trek, Spock’s Controller, Season 3, e1. That Which Survives Episode Reproduction.. Custom made Screen Accurate body, Custom Turned and knurled aluminum center knob. SPOCKS’ BRAIN CONTROL 2022. This Controller is Screen Accurate in every detail. ACCURATE PROFILE AND HEIGHT Lathe turned aluminum center knob. Photo of Greg Jein Collection Set Used. Spock’s Brain Controller and, accurate flanking plastic knobs as well. Body color and patterns are Painted to match the Screen Used Prop as Seen on the episode. The Enterprise is approached by an ion-propelled craft much to Eng. Scott’s liking; from it enters a female who renders everyone unconscious. When the crew wakes up, McCoy finds Spock alive in sick bay but with his brain surgically removed. A control system is made. This is the remote for Spock. The harlequin pattern on the prop is a nod to the historic context of mimes and clowns, is Spock now a mime? Oh crap & creepy huh.. The Control Prop before you is a very accurate copy of the Set Used Version and features. Controller Measures: (approximate in inches) 1 high x 5-1/2 long x 3-1/2 wide. Heavy feel as it is solid cast acrylic everywhere. Cast translucent and opaque acrylic buttons in colors as seen on the episode. Pearl lacquer paint and harlequin pattern to match the colors and design seen On Set. Lathe turned ACCURATE HEIGHT AND PROFILE center aluminum knob with screen accurate knurl detail. Compare the Greg Jein Collection photo of Set Used Spocks’ Brain Controller. Flanking black plastic knobs secured with epoxy & BRASS PINS to insure they can not come loose. A custom made 1″ thick acrylic display stand recalling Spock’s favorite game, 3D chess, Measures: (approximate in inches) 4 x 6 x 1 and has four small feet and acrylic rods (pinned to base with 1/8″ acrylic dowel) for durable display at the perfect viewing angle. Some Star Trek Prop History For Inquiring Minds. Most of these Prop Makers and Technicians have passed-on. Below are old-timer accounts of convention conversations before conventions were really a fad. (all these are therefore 2nd hand stories). The persons quoted worked for; Desilu ®, NBC ®, Paramount ® & Gene. Star Trek’s machinist. And made all the metal prop parts for all three seasons of the show. Parts were made to order for each episode as in those times (the 1960’s) as machining was done by hand and there was no advantage to making short runs (and no studio funding either). Each episode had a specific budget. Speaking of budgets, Bob relied on his Star Trek friend. According to Bob there was no magic drum of Phaser Nozzles and every job was a mad-dash to meet the filming deadlines. Because parts were made only to order, parts varied quite a bit. These variations can be seen in all the surviving examples of TOS hand props from Phaser to Communicators and Tricorders. Sometimes it was not that a new design was needed but rather that when one Wings it from a sketch, in a hurry using what is on-hand, you get an unintended-new-version of something (in the 1960’s the TV audience never could see that). Robert Archer and Bob Stone worked closely together so when the show was canceled suddenly in season three, Robert Archer ended up with a nice collection of hand props. Made the molds for hand props. He also did all the casting and forming. This included; Vacuum form bucks, Fiberglass molds and urethane molds. Again, according to him most work is done in the normal Hollywood maddening rush. He shared with his convention friends that there were many molds made from molds when the production schedule demanded this. He also shared that when the show ended he rescued the molds from being discarded by putting them in his garage. 1919 was the director of special effects for the show. He handled and repaired many of the props on-set. When the show was canceled in season three he rescued many hand props and even some models from the scrap heap. Dick Ruben, Prop & Art Assistant on the show, got his Set-Used Klingon disruptor from James. Ruggs held on to his rather large Star Trek collection for many years. It is widely known that Greg Jein got his Holy-Grail Hero Phaser from James. In closing a nod to. A prop technician, who reported that he repaired some hand props hundreds of times as they were often damaged during filming. He had also shared that the fiberglass Mid-Grade’s, and some other props often used basswood strips between the seams to establish uniform dimensions. Watch some YouTube Star Trek TOS bloopers to see what he was talking about when it comes to repairs and hand props flying apart. This item is in the category “Collectibles\Science Fiction & Horror\Star Trek Collectibles\Other Star Trek Collectibles”. The seller is “susannetrek” and is located in this country: US. This item can be shipped worldwide.

• Convention/Event: New York Comic Con
• Brand: jonpaultrek2012
• Type: Star Trek Prop
• Character: Captain Kirk
• Signed: No
• Series/Movie: Original Series
• Genre: Science Fiction & Horror
• Country/Region of Manufacture: United States
• Robert Lansing: Teri Garr
• Franchise: Star Trek
• Modified Item: No
• Vintage: No

]]> https://myfirststartrek.com/2022/11/star-trek-spocks-brain-control-s3-e1/feed/ 0 https://myfirststartrek.com/2020/02/star-trek-iii-microorganism-from-genesis-spocks-coffin-prop-screen-used-261-2/ https://myfirststartrek.com/2020/02/star-trek-iii-microorganism-from-genesis-spocks-coffin-prop-screen-used-261-2/#comments Tue, 25 Feb 2020 01:44:47 +0000 http://myfirststartrek.com/2020/02/star-trek-iii-microorganism-from-genesis-spocks-coffin-prop-screen-used-261-2/ Read more »

]]>






STAR TREK III: SEARCH FOR SPOCK GENESIS PLANET MICROORGANISM. This prop items featured in the third Star Trek feature film The Search for Spock, Kirks (William Shatner) son, David Marcus (Merritt Butrick) researches the Genesis planet which was created in Star Trek II: The Wrath of Khan. Incredibly unstable, any life forms in contact with the planet are subject to the effects of rapid aging and evolution. This includes the microbes present on the surface of Spocks (Leonard Nimoy) casket when it was ejected from the U. Enterprise following his funeral in the previous film. The microbes began evolving into these orange creatures that later became gigantic. Made of cast latex, these creatures are opaque orange with additional paint for detail. For any question pleas ask. This is part of the Filmwelt Collection US (Filmworld USA). This is an original which comes directly from the Paramount warehouse and personally acquired by Martin Netter in 2006 – 2009 and has since been stored in order to preserve it for the future. Your unique opportunity to acquire an original. With the best autentity. All proceeds will be used to support the Filmwelt Collection and future projects in USA. The item “STAR TREK III MICROORGANISM from GENESIS Spocks Coffin PROP SCREEN USED (261)” is in sale since Sunday, February 16, 2020. This item is in the category “Entertainment Memorabilia\Movie Memorabilia\Props\Originals”. The seller is “filmwelt-us” and is located in Longwood, Florida. This item can be shipped worldwide.

• Country/Region of Manufacture: United States

]]> https://myfirststartrek.com/2020/02/star-trek-iii-microorganism-from-genesis-spocks-coffin-prop-screen-used-261-2/feed/ 0 https://myfirststartrek.com/2020/01/star-trek-iii-microorganism-from-genesis-spocks-coffin-prop-screen-used-261/ https://myfirststartrek.com/2020/01/star-trek-iii-microorganism-from-genesis-spocks-coffin-prop-screen-used-261/#comments Thu, 23 Jan 2020 07:00:28 +0000 http://myfirststartrek.com/2020/01/star-trek-iii-microorganism-from-genesis-spocks-coffin-prop-screen-used-261/ Read more »

]]>






STAR TREK III: SEARCH FOR SPOCK GENESIS PLANET MICROORGANISM. This prop items featured in the third Star Trek feature film The Search for Spock, Kirks (William Shatner) son, David Marcus (Merritt Butrick) researches the Genesis planet which was created in Star Trek II: The Wrath of Khan. Incredibly unstable, any life forms in contact with the planet are subject to the effects of rapid aging and evolution. This includes the microbes present on the surface of Spocks (Leonard Nimoy) casket when it was ejected from the U. Enterprise following his funeral in the previous film. The microbes began evolving into these orange creatures that later became gigantic. Made of cast latex, these creatures are opaque orange with additional paint for detail. For any question pleas ask. This is part of the Filmwelt Collection US (Filmworld USA). This is an original which comes directly from the Paramount warehouse and personally acquired by Martin Netter in 2006 – 2009 and has since been stored in order to preserve it for the future. Your unique opportunity to acquire an original. With the best autentity. All proceeds will be used to support the Filmwelt Collection and future projects in USA. The item “STAR TREK III MICROORGANISM from GENESIS Spocks Coffin PROP SCREEN USED (261)” is in sale since Tuesday, January 21, 2020. This item is in the category “Entertainment Memorabilia\Movie Memorabilia\Props\Originals”. The seller is “filmwelt-us” and is located in Longwood, Florida. This item can be shipped worldwide.

• Country/Region of Manufacture: United States

]]> https://myfirststartrek.com/2020/01/star-trek-iii-microorganism-from-genesis-spocks-coffin-prop-screen-used-261/feed/ 0