https://myfirststartrek.com Sat, 01 Aug 2026 19:55:42 +0000 en-US hourly 1 https://wordpress.org/?v=4.1.1 https://myfirststartrek.com/2026/03/star-trek-24-inch-long-light-up-doomsday-machine-planet-killer/ https://myfirststartrek.com/2026/03/star-trek-24-inch-long-light-up-doomsday-machine-planet-killer/#comments Wed, 11 Mar 2026 07:21:56 +0000 https://myfirststartrek.com/2026/03/star-trek-24-inch-long-light-up-doomsday-machine-planet-killer/ Read more »

]]>




Light up 24 Doomsday Machine from the Original Star Trek episode’The Doomsday Machine. This is a recreation of the Iconic Doomsday Machine from the original series Star Trek episode “The Doomsday Machine”, one of my favorite episodes. Chances are, if you’re reading this then you already know of the infamous planet killer. This is a custom 3D printed and pre-painted piece, which glows red and yellow down the throat via a 9 volt battery with on/off switch (9 volt battery not included), providing a sense of doom which. Looks fantastic to display! Each model is individually hand-painted, and the accent paint may vary slightly from the photos shown. The Doomsday Machine is 24″ long and approximately 11.8″ tall from the base to the highest point of the model. This will make an excellent and unique addition to your Star Trek collection or as a stand alone piece! Please message us with any questions you may have.

]]> https://myfirststartrek.com/2026/03/star-trek-24-inch-long-light-up-doomsday-machine-planet-killer/feed/ 0 https://myfirststartrek.com/2024/06/live-long-watching-star-trek-2009-for-the-first-time/ https://myfirststartrek.com/2024/06/live-long-watching-star-trek-2009-for-the-first-time/#comments Sat, 15 Jun 2024 12:36:03 +0000 https://myfirststartrek.com/2024/06/live-long-watching-star-trek-2009-for-the-first-time/ ]]> https://myfirststartrek.com/2024/06/live-long-watching-star-trek-2009-for-the-first-time/feed/ 0 https://myfirststartrek.com/2024/05/star-trek-beach-towel-mid-seventies-mr-spock-live-long-and-prosper-franco-3/ https://myfirststartrek.com/2024/05/star-trek-beach-towel-mid-seventies-mr-spock-live-long-and-prosper-franco-3/#comments Fri, 03 May 2024 00:14:59 +0000 https://myfirststartrek.com/2024/05/star-trek-beach-towel-mid-seventies-mr-spock-live-long-and-prosper-franco-3/ Read more »

]]>





Star Trek – Mr. Live Long and Prosper. Towel measures approximately 55 x 27 inches. Light wear but quite nice. If purchasing multiple items please wait to pay until I have sent you a combined invoice. International Buyers – Please Note. We do not mark merchandise values below value or mark items as’gifts’ – US and International government regulations prohibit such behavior.

]]> https://myfirststartrek.com/2024/05/star-trek-beach-towel-mid-seventies-mr-spock-live-long-and-prosper-franco-3/feed/ 0 https://myfirststartrek.com/2023/11/vintage-star-trek-spock-live-long-and-prosper-hand-cookie-jar-star-treasure-151/ https://myfirststartrek.com/2023/11/vintage-star-trek-spock-live-long-and-prosper-hand-cookie-jar-star-treasure-151/#comments Thu, 09 Nov 2023 18:26:25 +0000 https://myfirststartrek.com/2023/11/vintage-star-trek-spock-live-long-and-prosper-hand-cookie-jar-star-treasure-151/

























Pre-owned and with scuffs and chipped. Photos are part of description. In need of cleaning.

]]> https://myfirststartrek.com/2023/11/vintage-star-trek-spock-live-long-and-prosper-hand-cookie-jar-star-treasure-151/feed/ 0 https://myfirststartrek.com/2023/08/star-trek-commercial-poster-live-long-and-prosper/ https://myfirststartrek.com/2023/08/star-trek-commercial-poster-live-long-and-prosper/#comments Thu, 03 Aug 2023 05:30:40 +0000 https://myfirststartrek.com/2023/08/star-trek-commercial-poster-live-long-and-prosper/ Read more »

]]>


Star Trek Commercial Poster Live Long and Prosper. This product data sheet is originally written in English. This poster is 23 by 35 inches approximately and is in mint condition. Conversion Table: Inches to Centimeters. 12 x 12 inches is approximately 30 x 30cm. 11 x 17 inches is approximately 28 x 43cm. 12 x 18 inches is approximately 31 x 46cm. 18 x 24 inches is approximately 46 x 61cm. 20 x 30 inches is approximately 51 x 76cm. 24 x 36 inches is approximately 61 x 91cm. For other dimensions please use the following conversion rate: 1 inch is equal to 2.54 centimeters, and 1 centimeter is equal to. If you have any difficulties with calculating dimensions, please let us know. The math-geniuses at Postersultan will be happy to help you out! Or at least we can try. If you would like to know more about us, our business or our products please check out our about me page. ATLEAST 1 OUT OF 10 ITEMS NEVER REACHES ITS DESTINATION. They are more clearly stated in our about me page. You can see them by clicking on the word ME next to our username POSTERSULTAN. Powered by SixBit’s eCommerce Solution.

]]> https://myfirststartrek.com/2023/08/star-trek-commercial-poster-live-long-and-prosper/feed/ 0 https://myfirststartrek.com/2023/05/star-trek-beach-towel-mid-seventies-mr-spock-live-long-and-prosper-franco-2/ https://myfirststartrek.com/2023/05/star-trek-beach-towel-mid-seventies-mr-spock-live-long-and-prosper-franco-2/#comments Wed, 03 May 2023 02:18:38 +0000 https://myfirststartrek.com/2023/05/star-trek-beach-towel-mid-seventies-mr-spock-live-long-and-prosper-franco-2/ Read more »

]]>





Star Trek – Mr. Live Long and Prosper. Towel measures approximately 55 x 27 inches. Light wear but quite nice. If purchasing multiple items please wait to pay until I have sent you a combined invoice. International Buyers – Please Note. We do not mark merchandise values below value or mark items as’gifts’ – US and International government regulations prohibit such behavior. This item is in the category “Collectibles\Science Fiction & Horror\Star Trek Collectibles\Other Star Trek Collectibles”. The seller is “yardroc” and is located in this country: US. This item can be shipped to United States, New Zealand, Fiji, Papua New Guinea, Wallis and Futuna, Gambia, Malaysia, Taiwan, Poland, Oman, Suriname, United Arab Emirates, Kenya, Argentina, Guinea-Bissau, Armenia, Uzbekistan, Bhutan, Senegal, Togo, Ireland, Qatar, Burundi, Netherlands, Slovakia, Slovenia, Equatorial Guinea, Thailand, Aruba, Sweden, Iceland, Macedonia, Belgium, Israel, Kuwait, Liechtenstein, Benin, Algeria, Antigua and Barbuda, Italy, Swaziland, Tanzania, Pakistan, Burkina Faso, Panama, Singapore, Kyrgyzstan, Switzerland, Djibouti, Chile, China, Mali, Botswana, Republic of Croatia, Cambodia, Indonesia, Portugal, Malta, Tajikistan, Vietnam, Cayman Islands, Paraguay, Saint Helena, Cyprus, Seychelles, Rwanda, Bangladesh, Australia, Austria, Sri Lanka, Gabon Republic, Zimbabwe, Bulgaria, Czech Republic, Norway, Côte d’Ivoire (Ivory Coast), Kiribati, Turkmenistan, Grenada, Greece, Haiti, Greenland, Yemen, Afghanistan, Montenegro, Mongolia, Nepal, Bahamas, Bahrain, United Kingdom, Bosnia and Herzegovina, Hungary, Angola, Western Samoa, France, Mozambique, Namibia, Peru, Denmark, Guatemala, Solomon Islands, Vatican City State, Sierra Leone, Nauru, Anguilla, El Salvador, Dominican Republic, Cameroon, Guyana, Azerbaijan Republic, Macau, Georgia, Tonga, San Marino, Eritrea, Saint Kitts-Nevis, Morocco, Saint Vincent and the Grenadines, Mauritania, Belize, Philippines, Democratic Republic of the Congo, Republic of the Congo, Colombia, Spain, Estonia, Bermuda, Montserrat, Zambia, South Korea, Vanuatu, Ecuador, Albania, Ethiopia, Monaco, Niger, Laos, Ghana, Cape Verde Islands, Moldova, Madagascar, Saint Pierre and Miquelon, Lebanon, Liberia, Bolivia, Maldives, Gibraltar, Hong Kong, Central African Republic, Lesotho, Nigeria, Mauritius, Saint Lucia, Jordan, Guinea, Canada, Turks and Caicos Islands, Chad, Andorra, Romania, Costa Rica, India, Mexico, Serbia, Kazakhstan, Saudi Arabia, Japan, Lithuania, Trinidad and Tobago, Malawi, Nicaragua, Finland, Tunisia, Luxembourg, Uganda, Brazil, Turkey, Germany, Egypt, Latvia, Jamaica, South Africa, Brunei Darussalam, Honduras.

• Brand: Franco
• Character: Mr. Spock
• Series/Movie: The Original Series
• Franchise: Star Trek

]]> https://myfirststartrek.com/2023/05/star-trek-beach-towel-mid-seventies-mr-spock-live-long-and-prosper-franco-2/feed/ 0 https://myfirststartrek.com/2023/02/star-trek-tos-p1-j-long-or-greg-jein-style-hero-kit-2/ https://myfirststartrek.com/2023/02/star-trek-tos-p1-j-long-or-greg-jein-style-hero-kit-2/#comments Mon, 13 Feb 2023 00:06:51 +0000 https://myfirststartrek.com/2023/02/star-trek-tos-p1-j-long-or-greg-jein-style-hero-kit-2/ Read more »

]]>











THANK YOU FOR BEING PATIENT & HAPPY HOLIDAYS! This Kit allows you to make a reproduction of the Greg Jein owned P1 Hero! MORE FIBERGLASS PHASER SHELLS. Star Trek TOS, Greg Jein Style, John Long Style, P1 Hero Metal & Acrylic Kit. Includes all the metal and CNC acrylic prefabricated parts for a great building experience. Also includes a 19 page How-To-Book to guide you through the entire process. Kit includes all the parts shown in the First Image, Parts A2 thru H34, 38 parts PLUS a 19 page How-To-Book. No Cast Prop-Metal parts in this listing aka… R98 Pewter of ; 98% Tin & Bismuth & Copper. The Acrylic emitter and flip-up sights are. Machined on a lathe & mill. Just like the Set-Used originals. The parts that look like brass are brass. Crispy is 1 x 1.30 stamped aluminum 32 ga. Foil in exact match the MoPOP Paul Allen Family / Zolar-X Phaser. Side rails (Part T20) are mirror polished aluminum top & bottom. The screws and springs are steel. (the How-To-Book) to build a Hero P1 Phaser. Fits most 3-5/8 nominal P1 Shells. Fiberglass, AA/DS and, many others. You are the prop builder! Detailed specifications on for acrylic parts. Rod, & Tube Stock Included with The Kit. JL Brass Wire & Tube Parts. Each kit includes a baggie of rough cut rod and tube lengths including. The elusive 1/8 inch square brass part. For the Switch Ramp, here is a schedule of. The wire & tube stock provided in each kit: (on mobile devices you may be UNABLE TO SEE these tables and charts). P16-ACCESS PANEL PINS & K12-SIGHT COWLING AXLE. Q17- ACCESS PANEL SOCKET & K11-SIGHT COWLING AXLE TUBE. A15-SIGHT ACTUATOR CAM ROD. M13-ACRYLIC SIGHT AXLE PINS. S19-SWITCH RAMP FOR THUMBWHEEL. H34 BATTERY BOX PLATFORM. Entire Kit Parts Schedule (Corresponds to Listing Main Image). This is the complete list of parts provided in the kit. Kit-Part: Brass Brads (3-pcs). Kit-Part: Brass Emitter Housing. Kit-Part: Flat Head Phillips Screw. Kit-Part: Sight Cowling Return Spring. Kit-Part: Emitter Return Spring. Kit-Part: Sight Cowling Axle Tube JL 8126-3/32. Kit-Part: Sight Cowling Axle JL 8162-1/16. Kit-Part: Acrylic Flip-Up-Sight Axle Pins K&S 8169-0.072. Kit-Part: Emitter Actuator Camrod JL 8161-3/64. Kit-Part: Sight Actuator Cam Rod JL 8160-1/32. Kit-Part: Access Panel Pins JL 8162-1/16. Kit-Part: Access Panel Socket JL 8126-3/32. Kit-Part: Switch Ramp; JL-? Kit-Part: Emitter Swing Arm. Kit-Part: Swing Arm Boom. Kit-Part: Steel B-B; 0.177 inch diameter. Kit-Part: Brass Sight Cowling. Kit-Part: Yellow & Blue Wires. (N0T INCLUDED IN KIT). Kit-Part: Clear Acrylic Flip-Up-Sight. Kit-Part: Clear Acrylic Emitter. Kit-Part: Half Mood Meter Lens. Kit-Part: Miniature Light Bulb/LED. Kit-Part: Styrene or acrylic Battery Box Platform. Kit-Part: Brass Trigger Grip Stud. Shell; Faceplate, FG or Plastic. Shell; Top Main Body Housing, FG or Plastic. Shell; Bottom Main Body Housing, FG or Plastic. Return it in 30 days following. Prior to use, all Metal Parts MUST be cleaned to remove machine coolant residue. RESIDUE IS NOT VISIBLE AND DOES NOT FEEL OILY, BUT IT IS THERE! Use dish-washing detergent such as Dawn or Palmolive to insure a. Some Star Trek Prop History For Inquiring Minds. Most of these Prop Makers and Technicians have passed-on. Below are old-timer accounts of convention conversations before conventions were really a fad. (all 2nd hand stories). The persons quoted worked for; Desilu, NBC, Paramount & Gene. Was Star Trek’s machinist and made all the metal prop parts for all three seasons of the show. Parts were made to order for each episode as in those times (the 1960’s) as machining was done by hand and there was no advantage to making short runs (and no studio funding either). Each episode had a specific budget. Speaking of budgets, Bob relied on his Star Trek friend. According to Bob there was no magic drum of Phaser Nozzles and every job was a mad-dash to meet the filming deadlines. Because parts were made only to order, parts varied quite a bit. These variations can be seen in all the surviving examples of TOS hand props from Phaser to Communicators and Tricorders. Sometimes it was not that a new design was needed but rather that when one Wings it from a sketch, in a hurry using what is on-hand, you get an unintended-new-version of something (in the 1960’s the TV audience never could see that). Robert Archer and Bob Stone worked closely together so when the show was cancelled suddenly in season three, Robert Archer ended up with a nice collection of hand props. Made the molds for hand props. He also did all the casting and forming. This included; Vacuum form bucks, Fiberglass molds and, urethane molds. Again, according to him most work is done in the normal Hollywood maddening rush. He shared with his convention friends that there were many molds made from molds when the production schedule demanded this. He also shared that when the show ended he rescued the molds from being discarded by putting them in his garage. 1919 was the director of special effects for the show. He handled and repaired many of the props on-set. When the show was cancelled in season three he rescued many hand props and even some models from the scrap heap. Dick Ruben, Prop & Art Assistant on the show, got his Set-Used Klingon disruptor from James. Ruggs held on to his rather large Star Trek collection for many years. It is widely known that Greg Jein got his Holy-Grail Hero Phaser from James. In closing a nod to. A prop technician, who reported that he repaired some hand props hundreds of times as they were often damaged during filming. He had also shared that the fiberglass Mid-Grade’s, and some other props often used basswood strips between the seams to establish uniform dimensions. Watch some YouTube Star Trek TOS bloopers to see what he was talking when it comes to repairs and hand props flying apart. This item is in the category “Collectibles\Science Fiction & Horror\Star Trek Collectibles\Other Star Trek Collectibles”. The seller is “susannetrek” and is located in this country: US. This item can be shipped worldwide.

• Vintage: No
• Character: Captain Kirk
• Modified Item: No
• Convention/Event: New York Comic Con
• Signed: No
• Genre: Science Fiction & Horror
• Brand: jonpaultrek2012 ®
• john long P1: Greg Jein P1
• Character Family: Star Trek
• Series/Movie: Original Series
• Type: Phaser Metal Part
• Franchise: Star Trek

]]> https://myfirststartrek.com/2023/02/star-trek-tos-p1-j-long-or-greg-jein-style-hero-kit-2/feed/ 0 https://myfirststartrek.com/2022/12/amt-star-trek-exploration-set-model-kit-1-3-1974-s958-long-box/ https://myfirststartrek.com/2022/12/amt-star-trek-exploration-set-model-kit-1-3-1974-s958-long-box/#comments Fri, 16 Dec 2022 02:37:30 +0000 https://myfirststartrek.com/2022/12/amt-star-trek-exploration-set-model-kit-1-3-1974-s958-long-box/ Read more »

]]>










AMT Star Trek Exploration Set Model Kit 1-3 1974 S958 Long Box. Box has been opened but everything is still new. The box does have some wear. If you have any questions please feel free to ask before purchasing. This item is in the category “Collectibles\Science Fiction & Horror\Star Trek Collectibles\Other Star Trek Collectibles”. The seller is “elitecollectorsupplies” and is located in this country: US. This item can be shipped to United States, Canada, United Kingdom, Denmark, Romania, Slovakia, Bulgaria, Czech Republic, Finland, Hungary, Latvia, Lithuania, Malta, Estonia, Australia, Greece, Portugal, Cyprus, Slovenia, Japan, China, Sweden, South Korea, Indonesia, Taiwan, South Africa, Thailand, Belgium, France, Hong Kong, Ireland, Netherlands, Poland, Spain, Italy, Germany, Austria, Bahamas, Israel, Mexico, New Zealand, Philippines, Singapore, Switzerland, Norway, Saudi Arabia, United Arab Emirates, Qatar, Kuwait, Bahrain, Republic of Croatia, Malaysia, Brazil, Chile, Colombia, Costa Rica, Dominican Republic, Panama, Trinidad and Tobago, Guatemala, El Salvador, Honduras, Jamaica, Antigua and Barbuda, Aruba, Belize, Dominica, Grenada, Saint Kitts-Nevis, Saint Lucia, Montserrat, Turks and Caicos Islands, Barbados, Bangladesh, Bermuda, Brunei Darussalam, Bolivia, Ecuador, Egypt, French Guiana, Guernsey, Gibraltar, Guadeloupe, Iceland, Jersey, Jordan, Cambodia, Cayman Islands, Liechtenstein, Sri Lanka, Luxembourg, Monaco, Macau, Martinique, Maldives, Nicaragua, Oman, Peru, Pakistan, Paraguay, Reunion, Vietnam.

• Brand: AMT
• Type: Model
• Series/Movie: The Original Series
• Franchise: Star Trek

]]> https://myfirststartrek.com/2022/12/amt-star-trek-exploration-set-model-kit-1-3-1974-s958-long-box/feed/ 0 https://myfirststartrek.com/2022/10/star-trek-beach-towel-mid-seventies-mr-spock-live-long-and-prosper-franco/ https://myfirststartrek.com/2022/10/star-trek-beach-towel-mid-seventies-mr-spock-live-long-and-prosper-franco/#comments Tue, 01 Nov 2022 02:01:24 +0000 https://myfirststartrek.com/2022/10/star-trek-beach-towel-mid-seventies-mr-spock-live-long-and-prosper-franco/ Read more »

]]>





Star Trek – Mr. Live Long and Prosper. Towel measures approximately 55 x 27 inches. Light wear but quite nice. If purchasing multiple items please wait to pay until I have sent you a combined invoice. International Buyers – Please Note. We do not mark merchandise values below value or mark items as’gifts’ – US and International government regulations prohibit such behavior. This item is in the category “Collectibles\Science Fiction & Horror\Star Trek Collectibles\Other Star Trek Collectibles”. The seller is “yardroc” and is located in this country: US. This item can be shipped to United States, Canada, United Kingdom, Denmark, Romania, Slovakia, Bulgaria, Czech Republic, Finland, Hungary, Latvia, Lithuania, Malta, Estonia, Australia, Greece, Portugal, Cyprus, Slovenia, Japan, China, Sweden, South Korea, Indonesia, Taiwan, South Africa, Belgium, France, Hong Kong, Ireland, Netherlands, Poland, Spain, Italy, Germany, Austria, Bahamas, Israel, Mexico, New Zealand, Philippines, Singapore, Switzerland, Norway, Saudi Arabia, United Arab Emirates, Qatar, Kuwait, Bahrain, Republic of Croatia, Malaysia, Chile, Colombia, Costa Rica, Dominican Republic, Panama, Trinidad and Tobago, Guatemala, El Salvador, Honduras, Jamaica, Antigua and Barbuda, Aruba, Belize, Dominica, Grenada, Saint Kitts-Nevis, Saint Lucia, Montserrat, Turks and Caicos Islands, Barbados, Bangladesh, Bermuda, Brunei Darussalam, Bolivia, Egypt, French Guiana, Guernsey, Gibraltar, Guadeloupe, Iceland, Jersey, Jordan, Cambodia, Cayman Islands, Liechtenstein, Sri Lanka, Luxembourg, Monaco, Macau, Martinique, Maldives, Nicaragua, Oman, Pakistan, Paraguay, Reunion.

• Brand: Franco
• Character: Mr. Spock
• Series/Movie: The Original Series
• Franchise: Star Trek

]]> https://myfirststartrek.com/2022/10/star-trek-beach-towel-mid-seventies-mr-spock-live-long-and-prosper-franco/feed/ 0 https://myfirststartrek.com/2022/10/star-trek-tos-p1-j-long-or-greg-jein-style-hero-kit/ https://myfirststartrek.com/2022/10/star-trek-tos-p1-j-long-or-greg-jein-style-hero-kit/#comments Mon, 31 Oct 2022 13:54:24 +0000 https://myfirststartrek.com/2022/10/star-trek-tos-p1-j-long-or-greg-jein-style-hero-kit/ Read more »

]]>













This Kit allows you to make a reproduction of the Greg Jein owned P1 Hero. Star Trek TOS, Greg Jein Style, John Long Style, P1 Hero Metal & Acrylic Kit. Sale includes all the metal and CNC acrylic prefabricated parts for a great building experience. No shell included in sale BUT contact “bunnybuschmann” as. Sale includes a 19 page How-To-Book to guide you through the entire process. Kit includes all the parts shown in the Second Image, Parts A2 thru H34, 38 parts PLUS a 19 page How-To-Book. Metal Kit can be installed in a Diamond Select P1 and this requires the interior of said shell be entirely cleaned-out. No Cast Prop-Metal parts in this listing aka… R98 Pewter of ; 98% Tin & Bismuth & Copper. The Acrylic emitter and flip-up sights are. Machined on a lathe & mill. Just like the Set-Used originals. The parts that look like brass are brass. Crispy is 1 x 1.30 stamped aluminum 32 ga. Foil in exact match the MoPOP Paul Allen Family / Zolar-X Phaser. Side rails (Part T20) are mirror polished aluminum top & bottom. The screws and springs are steel. (the How-To-Book) to build a Hero P1 Phaser. Fits most 3-5/8 nominal P1 Shells. Fiberglass, AA/DS and, many others. You are the prop builder! Detailed specifications on for acrylic parts. Rod, & Tube Stock Included with The Kit. JL Brass Wire & Tube Parts. Each kit includes a baggie of rough cut rod and tube lengths including. The elusive 1/8 inch square brass part. For the Switch Ramp, here is a schedule of. The wire & tube stock provided in each kit: (on mobile devices you may be UNABLE TO SEE these tables and charts). P16-ACCESS PANEL PINS & K12-SIGHT COWLING AXLE. Q17- ACCESS PANEL SOCKET & K11-SIGHT COWLING AXLE TUBE. A15-SIGHT ACTUATOR CAM ROD. M13-ACRYLIC SIGHT AXLE PINS. S19-SWITCH RAMP FOR THUMBWHEEL. H34 BATTERY BOX PLATFORM. Entire Kit Parts Schedule (Corresponds to Listing Main Image). This is the complete list of parts provided in the kit. Kit-Part: Brass Brads (3-pcs). Kit-Part: Brass Emitter Housing. Kit-Part: Flat Head Phillips Screw. Kit-Part: Sight Cowling Return Spring. Kit-Part: Emitter Return Spring. Kit-Part: Sight Cowling Axle Tube JL 8126-3/32. Kit-Part: Sight Cowling Axle JL 8162-1/16. Kit-Part: Acrylic Flip-Up-Sight Axle Pins K&S 8169-0.072. Kit-Part: Emitter Actuator Camrod JL 8161-3/64. Kit-Part: Sight Actuator Cam Rod JL 8160-1/32. Kit-Part: Access Panel Pins JL 8162-1/16. Kit-Part: Access Panel Socket JL 8126-3/32. Kit-Part: Switch Ramp; JL-? Kit-Part: Emitter Swing Arm. Kit-Part: Swing Arm Boom. Kit-Part: Steel B-B; 0.177 inch diameter. Kit-Part: Brass Sight Cowling. Kit-Part: Yellow & Blue Wires. (N0T INCLUDED IN KIT). Kit-Part: Clear Acrylic Flip-Up-Sight. Kit-Part: Clear Acrylic Emitter. Kit-Part: Half Mood Meter Lens. Kit-Part: Miniature Light Bulb/LED. Kit-Part: Styrene or acrylic Battery Box Platform. Kit-Part: Brass Trigger Grip Stud. Shell; Faceplate, FG or Plastic. Shell; Top Main Body Housing, FG or Plastic. Shell; Bottom Main Body Housing, FG or Plastic. Prior to use, all Metal Parts MUST be cleaned to remove machine coolant residue. RESIDUE IS NOT VISIBLE AND DOES NOT FEEL OILY, BUT IT IS THERE! Use dish-washing detergent such as Dawn or Palmolive to insure a. This item is in the category “Collectibles\Science Fiction & Horror\Star Trek Collectibles\Other Star Trek Collectibles”. The seller is “jonpaultrek2012″ and is located in this country: US. This item can be shipped worldwide.

• Vintage: No
• Character: Captain Kirk
• Country/Region of Manufacture: United States
• Convention/Event: New York Comic Con
• Signed: No
• Genre: Science Fiction & Horror
• Brand: jonpaultrek2012 ®
• Series/Movie: The Original Series
• Type: Phaser
• Franchise: Star Trek

]]> https://myfirststartrek.com/2022/10/star-trek-tos-p1-j-long-or-greg-jein-style-hero-kit/feed/ 0