THANK YOU FOR BEING PATIENT & HAPPY HOLIDAYS! This Kit allows you to make a reproduction of the Greg Jein owned P1 Hero! MORE FIBERGLASS PHASER SHELLS. Star Trek TOS, Greg Jein Style, John Long Style, P1 Hero Metal & Acrylic Kit. Includes all the metal and CNC acrylic prefabricated parts for a great building experience. Also includes a 19 page How-To-Book to guide you through the entire process. Kit includes all the parts shown in the First Image, Parts A2 thru H34, 38 parts PLUS a 19 page How-To-Book. No Cast Prop-Metal parts in this listing aka… R98 Pewter of ; 98% Tin & Bismuth & Copper. The Acrylic emitter and flip-up sights are. Machined on a lathe & mill. Just like the Set-Used originals. The parts that look like brass are brass. Crispy is 1 x 1.30 stamped aluminum 32 ga. Foil in exact match the MoPOP Paul Allen Family / Zolar-X Phaser. Side rails (Part T20) are mirror polished aluminum top & bottom. The screws and springs are steel. (the How-To-Book) to build a Hero P1 Phaser. Fits most 3-5/8 nominal P1 Shells. Fiberglass, AA/DS and, many others. You are the prop builder! Detailed specifications on for acrylic parts. Rod, & Tube Stock Included with The Kit. JL Brass Wire & Tube Parts. Each kit includes a baggie of rough cut rod and tube lengths including. The elusive 1/8 inch square brass part. For the Switch Ramp, here is a schedule of. The wire & tube stock provided in each kit: (on mobile devices you may be UNABLE TO SEE these tables and charts). P16-ACCESS PANEL PINS & K12-SIGHT COWLING AXLE. Q17- ACCESS PANEL SOCKET & K11-SIGHT COWLING AXLE TUBE. A15-SIGHT ACTUATOR CAM ROD. M13-ACRYLIC SIGHT AXLE PINS. S19-SWITCH RAMP FOR THUMBWHEEL. H34 BATTERY BOX PLATFORM. Entire Kit Parts Schedule (Corresponds to Listing Main Image). This is the complete list of parts provided in the kit. Kit-Part: Brass Brads (3-pcs). Kit-Part: Brass Emitter Housing. Kit-Part: Flat Head Phillips Screw. Kit-Part: Sight Cowling Return Spring. Kit-Part: Emitter Return Spring. Kit-Part: Sight Cowling Axle Tube JL 8126-3/32. Kit-Part: Sight Cowling Axle JL 8162-1/16. Kit-Part: Acrylic Flip-Up-Sight Axle Pins K&S 8169-0.072. Kit-Part: Emitter Actuator Camrod JL 8161-3/64. Kit-Part: Sight Actuator Cam Rod JL 8160-1/32. Kit-Part: Access Panel Pins JL 8162-1/16. Kit-Part: Access Panel Socket JL 8126-3/32. Kit-Part: Switch Ramp; JL-? Kit-Part: Emitter Swing Arm. Kit-Part: Swing Arm Boom. Kit-Part: Steel B-B; 0.177 inch diameter. Kit-Part: Brass Sight Cowling. Kit-Part: Yellow & Blue Wires. (N0T INCLUDED IN KIT). Kit-Part: Clear Acrylic Flip-Up-Sight. Kit-Part: Clear Acrylic Emitter. Kit-Part: Half Mood Meter Lens. Kit-Part: Miniature Light Bulb/LED. Kit-Part: Styrene or acrylic Battery Box Platform. Kit-Part: Brass Trigger Grip Stud. Shell; Faceplate, FG or Plastic. Shell; Top Main Body Housing, FG or Plastic. Shell; Bottom Main Body Housing, FG or Plastic. Return it in 30 days following. Prior to use, all Metal Parts MUST be cleaned to remove machine coolant residue. RESIDUE IS NOT VISIBLE AND DOES NOT FEEL OILY, BUT IT IS THERE! Use dish-washing detergent such as Dawn or Palmolive to insure a. Some Star Trek Prop History For Inquiring Minds. Most of these Prop Makers and Technicians have passed-on. Below are old-timer accounts of convention conversations before conventions were really a fad. (all 2nd hand stories). The persons quoted worked for; Desilu, NBC, Paramount & Gene. Was Star Trek’s machinist and made all the metal prop parts for all three seasons of the show. Parts were made to order for each episode as in those times (the 1960’s) as machining was done by hand and there was no advantage to making short runs (and no studio funding either). Each episode had a specific budget. Speaking of budgets, Bob relied on his Star Trek friend. According to Bob there was no magic drum of Phaser Nozzles and every job was a mad-dash to meet the filming deadlines. Because parts were made only to order, parts varied quite a bit. These variations can be seen in all the surviving examples of TOS hand props from Phaser to Communicators and Tricorders. Sometimes it was not that a new design was needed but rather that when one Wings it from a sketch, in a hurry using what is on-hand, you get an unintended-new-version of something (in the 1960’s the TV audience never could see that). Robert Archer and Bob Stone worked closely together so when the show was cancelled suddenly in season three, Robert Archer ended up with a nice collection of hand props. Made the molds for hand props. He also did all the casting and forming. This included; Vacuum form bucks, Fiberglass molds and, urethane molds. Again, according to him most work is done in the normal Hollywood maddening rush. He shared with his convention friends that there were many molds made from molds when the production schedule demanded this. He also shared that when the show ended he rescued the molds from being discarded by putting them in his garage. 1919 was the director of special effects for the show. He handled and repaired many of the props on-set. When the show was cancelled in season three he rescued many hand props and even some models from the scrap heap. Dick Ruben, Prop & Art Assistant on the show, got his Set-Used Klingon disruptor from James. Ruggs held on to his rather large Star Trek collection for many years. It is widely known that Greg Jein got his Holy-Grail Hero Phaser from James. In closing a nod to. A prop technician, who reported that he repaired some hand props hundreds of times as they were often damaged during filming. He had also shared that the fiberglass Mid-Grade’s, and some other props often used basswood strips between the seams to establish uniform dimensions. Watch some YouTube Star Trek TOS bloopers to see what he was talking when it comes to repairs and hand props flying apart. This item is in the category “Collectibles\Science Fiction & Horror\Star Trek Collectibles\Other Star Trek Collectibles”. The seller is “susannetrek” and is located in this country: US. This item can be shipped worldwide.
- Vintage: No
- Character: Captain Kirk
- Modified Item: No
- Convention/Event: New York Comic Con
- Signed: No
- Genre: Science Fiction & Horror
- Brand: jonpaultrek2012 ®
- john long P1: Greg Jein P1
- Character Family: Star Trek
- Series/Movie: Original Series
- Type: Phaser Metal Part
- Franchise: Star Trek