Five Part Brass Antenna Kit; TO MAKE THE COMPLETE ASSEMBLY of a TOS Alpha Communicator. NO DRILLING AT ALL. ALL WHEEL HOLES ARE FACTORY DRILLED WITH SPECIAL TOOLS SO ALL WIRES AND THE AXLE SLIDE RIGHT-IN! THE AXLE IS A FINISHED MACHINED PART, NOT CUT ROD. NO SHARP HOLES AND NO SANDING! THE LIDS ARE PRECISION STAMPING’S AND ALL HOLES ARE FACTORY DE-BURRED WITH SPECIAL TOOLING. This is the exact and complete Brass Antenna Lid Kit of Five Parts, for the TOS Alpha Communicator. All dimensions nominal inches (see images for cad dimensions). 1 TOS Alpha Communicator Antenna 0.027 inch perforated brass, 1? Inch x 2 15/16 inch. Antenna Lid Weight is more or less. Exactly : 10.100g or, 0.3562oz or, 155.88gn or, 1.495dwt. 1 Factory bent 1/16 inch brass frame wire. Inch brass metal axle wheels (you drill nothing). 1 brass metal axle bar? Inch by 2 inch, perfectly fit to the wheels. You will need to solder the parts together to recreate the Alpha Communicator Antenna Assembly. PERFORATED LID: The sheet brass is 0.027 inches thick nominal. The 5/64 inch perforated holes are 1/8 inch O. And the hole offsets are all exact to the historic museum original. The Antenna Assembly is 100% Set Accurate. Accurate Antenna Lid Weight of. 10.100g or, 0.3562oz or, 155.88gn or, 1.495dwt. This Set Accurate communicator lid Flips Open Correctly. Just like on the TV show Sound Stage in the 1960s. A thicker metal antenna, because of momentum, would not flip open properly. The Kit, once assembled by you, is a re-perfect replica of the Set Used Prop. NO DRILLING OR SANDING FOR ONE! The engineering has been invisibly improved for an exacting and faster assembly. The parts slide right together thanks to a few ten-thousands of an inch clearance engineered into the design and, ALL the holes a precisely factory drilled in the exact right spots. HI ALL: We invested a lot in tooling and materials for this project and will not ever be running out. BUILDING A COMMUNICATOR YOUTUBE. Made to surpass general the requirements of DIN ISO 2768-M fabrication tolerances. Wash parts in detergent such as Dawn Dish-washing liquid and towel dry before installing. There is a non-visible thin film of oil on every metal part and failure to wash the parts may cause problems with glue bonding and any finishes, like paint or clear lacquer, that may be applied. Thank You; susannetrek2012, jonpaultrek2012. This item is in the category “Collectibles\Science Fiction & Horror\Star Trek Collectibles\Other Star Trek Collectibles”. The seller is “jonpaultrek2012″ and is located in this country: US. This item can be shipped worldwide.
- Vintage: No
- Character: Captain Kirk
- Modified Item: No
- Convention/Event: New York Comic Con
- Genre: Science Fiction & Horror
- Brand: jonpaultrek2012 ®
- Series/Movie: Original Series
- Type: Communicator
- Franchise: Star Trek